Hybrid Strength
Lasting Performance
The only product on the market completely non-toxic and made
with organic compounds.
Multiface 1.5
Two component Hybrid Vulcanizing Material for Conveyor Belts
No Hazard for People, Transport and Storage
No toxic ingredients, no CMR constituents (carcinogenic, mutagenic and reprotoxic), no solvents, VOC-free, no dangerous goods in terms of transportation, no temperature sensitive storage.
Suitable for Food Contact
With official approval for food contact
according to EG 1935/2004 and EU 10/2011.
No Primer and No Waiting Time for Evaporation
It does not require the preliminary use of solvents and an adhesion promoter. Therefore, extremely fast and usable at freezing temperatures and under conditions with extreme humidity, drizzle and dust.
Long Working Time And Overcoating Time
The long pot life and open time as well as the properties enable convenient processing on large surfaces, even with short interruptions or wet on dry, with virtually no maximum overcoating time.
Simple Procedure
Only 5 steps are required: roughening, cleaning the surface with a hand brush, applying a first layer of Multiface® and rub it into the surface with a round brush and filling up the damage. That’s it!
Max. 30 Minutes Hardening Time at +23°c / 73°f
The accelerated curing after the processing time allows a quick return to service, even at temperatures below freezing.
Our products
Consumption Material
MF-1.5-25-B
Cartridge 25 g
MF-1.5-50-B
Cartridge 50 g
MF-1.5-200-B
Cartridge 200 g
MF-1.5-400-B
Cartridge 400 g
MF-1.5-1500-B
Cartridge 1,500 g
MF-1.5-X-B
Bulky quantity
Starter Set
Cartridge 50 g
Starter Set
Cartridge 200 g
Starter Set
Cartridge 400 g
Starter Set
Cartridge 1,500 g
Starter Box
Cartridge 400 g
Highlights
NON-TOXIC
MULTIFACE® is the only repair material on the market without any toxic ingredients.
FOOD CONTACT APPROVED
Approved for food contact according to EC 1935/2004 and EU 10/2011, FDA in preparation.
QUICK CURING
Curing within max. 30 min. at +23°C / 73°F or 60 min.
at +5°C / 41°F and 20 min. at frost using a heating gun.
UNIVERSAL
Suitable for the repair of conveyor belts made of rubber, PVC and PU, even in vertical position.
EASY TO APPLY
Extremely easy to apply, even in several passes with short interruptions, with almost no overcoating time.
ALMOST NO MATERIAL WASTE
Once opened, the cartridges can be resealed for later use of the remaining quantity.
ULTRA RESISTANT
Resistant to sun light, salt water, oils, diesel, acids, alkalis and temperatures of -50°C/-58°F to +150°C/302°F as rip repair.
Pumatack